Artificial climate room refers to an instrument that can simulate the natural environment. The parameters such as temperature, humidity, and light in the natural environment are all artificially uncontrollable. For the growth of plants, the most suitable temperature, humidity and so on. If we study one of the factors of the plant, we need to ensure that other parameter factors do not change or change very little. At this time, the instrument that can control the parameters artificially has been developed. The artificial climate room is one of them. It is controlled by a fully automatic computer. It can set the running time, temperature, humidity, and illuminance of the box in a unified manner. After the setting, the program will automatically run without any special care. Therefore, it is also called an artificial climate room. The artificial climate room has been widely used in scientific research units such as health and epidemic prevention, environmental protection, agriculture, forestry, animal husbandry, and other research institutes, colleges and universities laboratories, and production departments as special constant temperature and humidity for the cultivation and preservation of molds, bacteria and microorganisms, plant cultivation and breeding experiments, and lighting equipment. Can accurately simulate the climatic conditions of different environments. Japanese Restaurant Decoration The decorations of Japanese restaurants usually include the following elements:
5. Tatami: Tatami is a traditional Japanese style floor, usually made of straw or straw mats and wood. In Japanese restaurants, tatami is often used as a floor decoration to create a comfortable and natural atmosphere.
Japanese Restaurant Decoration,Japanese Restaurant Lantern,Japanese Decorations Carp Flag,Conveyor Belt Sushi Restaurant Guangzhou Yuyang Food Machinery Co., Ltd , https://www.yysushibelt.com
The artificial climate chamber consists of an experimental box, a refrigeration system, a heater, a humidification system, a lighting system, and a controller. The artificial climate incubator is equipped with an electronic timer, dry, wet, and temperature sensors inside and outside the experiment box to detect temperature and humidity. At the same time, the measured data is sent to the microcomputer controller to control the working status of the heater, refrigerator, humidifier, and lighting lamp group after data processing, and the temperature, humidity and light of the experimental box can be accurately controlled to achieve artificial Simulate the climatic and environmental conditions that occur in nature.
The two main components of the climate chamber are the temperature control system and the humidity control system. Let's take a closer look at the relevant information of these two systems.
Artificial Climate Room Humidity System: Humidity system consists of humidifier, dehumidifier, humidity sensor and control system. The humidifier adopts a high-power industrial ultrasonic humidifier with automatic water adding, automatic demineralized water, and a steam output of 3kg/h. The gas pipeline is connected to the chiller outlet by a PVC pipe of φ110mm. Then evenly blow to the entire room. The humidity transmitter uses a highly accurate capacitive humidity sensor. The dehumidifier consists of a compressor unit-cooler-heater in the temperature system of this solution. When the circulating air in the growth chamber passes through the cooling fan, the humidity in the air is removed, and the temperature is lowered. After heating by the heater, the temperature of the air is raised. Due to proper control, the temperature can be kept constant while dehumidifying.
Climate chamber temperature system: The temperature system consists of a heater, a compressor unit, a cooling fan, a vertical air duct, a temperature sensor, and a control system. Compressor set adopts highly efficient French Miram MT36 (3 HP) fully enclosed compressors (including imported accessories). The chiller adopts a domestically-made 30m2 high efficiency and low noise cooler. The temperature sensor adopts the imported (Ningbo assembly) KL type high precision thermistor, which has high precision and high reliability. The compressor assembly is mounted outdoors with a bracket and covered with a hood. The chiller is installed on the ceiling opposite the door. The inlet of the chiller is connected with the vertical air duct below it. The air inlet of the vertical air duct is on both sides of the bottom, and the heater is installed in the air duct.
Harmony screen: It can be used as a partition or decoration. Wind screens are usually made of wood or bamboo, with a large amount of natural elements on the surface, such as branches and leaves, flowers and plants.
Origami art: Origami art is a traditional Japanese handicraft commonly used to decorate tabletops or walls. Common patterns in origami art include crane, turtle, and longevity characters.
Lantern: Lantern is a traditional Japanese decoration, usually made of paper or cloth, with a frame at the bottom and top to support it. In Japanese restaurants, lanterns can be hung from the ceiling, creating an elegant and warm atmosphere.
Bonsai: Bonsai is a small landscape typically composed of stones, moss, and small plants. In Japanese restaurants, bonsai is often used as a tabletop decoration to create a natural and concise atmosphere.