China Horizontal Self-Balanced High Pressure Chemical Water Multistage Centrifugal Pump, Boiler Feed Pump, Duplex Stainless Steel Multi-Stage Industrial Pump

Model NO.: D
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump, Pumps, Circulating Pump, Water Pump
Materials: SS304, SS316, SS316L, Titanium, Monel, 2205, CD4MCU
Manufacturer Level: Top Level
Shaft Sealing: Mechanical Seal and Packing
Pump Arrangement: Horizontal
Pump Transmission: Direct Coupled, Gear Box, V-Belts, Universal Joint
Flange Standard: Customized
Motor Brand: ABB, Siemens or Reputed Chinese Brands
Pump Bearing: SKF, NSK or Reputed Chinese Brands
Trademark: Gaofeng
Transport Package: Standard Seaworthy Packing
Specification: Customized
Origin: China
HS Code: 8413709990
Brief introduction:
D(DF) series is a centrifugal pump of horizontal,single suction,multistage and sectional structure.It owns the features of high efficiency,wide performance range,smooth operation,low noise,easy maintenance...D(DF) series was designed to pump clean water or fluids have close characters of water. Also,by changing pump wetted parts,it is able to pump fluids like hot water,oil,corrosive fluids and fluids particles. 

Parameters:
  1. Flow rate:Q=20~540m3/h
  2. Total head:H=16~370m
  3. Speed:n=1450rpm/2950rpm
  4. S.g.:γ ≤1.15
  5. Temperature:T=-0~80ºC
  6. Pump diameter:80,100,125,150,200,250mm
Features:
  1. Advanced hydraulic models with high efficiency and wide performance range.
  2. Smooth operation and low noise.
  3. Both packing seal and mechanical seal are available.
  4. Completely sealed shaft which is non-contact with fluid.
  5. The pump material can be changed to pump corrosive fluids. D(F) stands for a pump which is suitable for corrosive fluids,but its performance and is totally the same to D series.
Structure:
  1. The pump set mainly consists of bearing housing,inlet and out section,middle section,guide vanes.
  2. The pump inlet is horizontal and outlet is vertical;The balance hose on the inlet is connected back to the water inlet side.
  3. Between bearings structure.The rotary part consists of shaft,impellers and a balance disk.
  4. The gaps between pump inlet section,middle section and outlet section are smeared by molybdenum disulfide compound calcium-based lubricating grease as the sealings. The gaps of rotary part and static part are sealed seal rings,guide vane sleeve and packing.
  5. Standard shaft sealing is packing,can be customized as mechanical seal. 
Structure drawing is as below
China Horizontal Self-Balanced High Pressure Chemical Water Multistage Centrifugal Pump, Boiler Feed Pump, Duplex Stainless Steel Multi-Stage Industrial Pump

1. Inlet section 2. Guide vane 3. Middle section 4. Outlet section 5. First-stage impeller 6. Impeller 7. Balance disk 8. Balance plate 9. End cover 10. Packing 11. Balance sleeve 12. Packing gland 13. O ring 14. Bearing 15. First-stage seal ring 16. Seal ring 17. Guide vane sleeve 18. Shaft 19. Shaft sleeve

Configuration:
China Horizontal Self-Balanced High Pressure Chemical Water Multistage Centrifugal Pump, Boiler Feed Pump, Duplex Stainless Steel Multi-Stage Industrial Pump

Application:
  1. Widely used in mining,factories and city water supply and drainage.
  2. Suitable to pump clean water and fluids have close physical and chemical characters of water,or fluids like hot water,oils,corrosive material and particles.
China Horizontal Self-Balanced High Pressure Chemical Water Multistage Centrifugal Pump, Boiler Feed Pump, Duplex Stainless Steel Multi-Stage Industrial Pump

 

Metal Baler

Hydraulic metal machine is mainly applicable to steel mills, recycling and processing industries and non-ferrous metal smelting industries. Hydraulic Baling Machine can squeeze all kinds of metal scrap (steel shaving, waste steel, waste aluminum, waste copper, waste stainless steel and scrap automobile waste, etc.) into cuboid, octagon, cylinder and other shapes of qualified charge, which can reduce the transportation and smelting cost, and improve the speed of furnace. It is mainly used for cold pressing under normal conditions for scrap metal scraps, scrap steel scraps, waste oil tank, disassembling car shell and other metal scraps with a thickness of less than 3mm. Cold pressed into blocks for easy storage and transportation or furnace.

Features:

1) Hydraulic drive, smooth and noiseless work, fast extrusion speed, large extrusion force, compact package block, not easy to be scattered.

2) high quality national standard steel plate with advanced welding technology to make the mechanical parts strong and durable, low failure rate, long service life.

3) the oil cylinder seal is imported glyd ring, good sealing performance, strong pressure resistance.

4) Convenient installation, small floor space, no foundation, foot, etc. Simple operation, detachable and PLC automatic mode.

5) Cold extrusion will not change the metal material and increase the utilization rate.

Metal Shavings Baler, Scrap Metal Baler, Waste Metal Baler, Sheet Metal Baler, Metal Scraps Baler

Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.jiangyinyejing.com

July 30, 2024