Disription: Model B(mm) b(mm) c(mm) d(mm) H (mm) h (mm) S(mm) SA-A200H 400 320 145 128 200 30 260 SA-A250H 500 410 175 160 250 33 300 SA-A300H 600 490 225 196 300 33 300 SA-A400H 800 670 300 260 400 40 360 SA-A500H 1000 840 375 325 500 45 420 SA-A600H 1200 1010 450 390 600 54 480 SA-A800H 1600 1340 600 520 800 72 640 SA-A1000H 2000 1680 750 650 1000 90 640 Length 1000 1000L Model L1a(mm) L2a(mm) L3a(mm) Weight(kg) SA-A200H-1000L 1100 860 120 62 SA-A250H-1000L 1125 865 130 85 SA-A300H-1000L 1150 870 140 120 SA-A400H-1000L 1200 900 150 208 SA-A500H-1000L 1250 930 160 325 SA-A600H-1000L 1300 960 170 480 SA-A800H-1000L 1400 1040 180 875 SA-A1000H-1000L 1500 1100 200 1395 Metal Body Square Water Cooling Tower This series of products run stable, low noise, energy-saving, in office buildings, shopping malls, hotels, residential areas and other central air-conditioning supporting the use of better results. Metal Body Square Water Cooling Tower,Tower Water Cooler,Water Cooled Cooling Tower,Tower Cooling System Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhou-arkfluid.comQuick Details
Packaging & Delivery
Packaging Details
plywood boxes,plastic bags,PE membranes and so on, or according to customized requests.
Delivery Time
About 40-60 days.
Specifications
Super Arch Yokohama FenderÂ
1. High performanceÂ
2. High stress concentrationÂ
3. Good after-sale service
    Their strong and simple constrction suits them to a wide variety of berths and docks where they will give trouble free service under the most worse conditions. Each type can be equiped with or without an additional embedded steel plate in the fender head. According to your request, our Arch Fenders can be made in different compounds, hardness grades, non-standard lengths and different bolting patterns.
Features:
    1. High energy absorption and low reaction force.
   2. High stress concentration.
   3. Easy replacement firm for installation.
   4. Easy to install and change.
   5. Tough and reliable design.
   6. Wide ranges of sizes and energy capacities.
   7. Bolted-on UHMW PE reduce the friction factor and shear force.
   8.  Be supplied quickly.
Specifications:
The company's standard cooling tower according to the international design conditions design, can also provide customers with non-standard operating conditions or specific sizes under the special, special design.
The circulating water pump suction port shall be located below the water level of the cooling tower catchment basin, and the cooling tower outlet pipe shall not be allowed to be higher than the maximum water level of the catchment basin.
Pipe mounts should be pipe racks and cooling towers should not be allowed to directly bear the weight of the pipes.
The rehydration pipe of the cooling tower should be provided with a support stand to avoid vibration of the pipe when the float valve is rehydrated.
Rehydration pressure should be below 5m water pressure, national standard
The flannage pressure is 1.0Mpa.
When two or more units are assembled, our company will provide a connecting balance tube to balance the chassis water level. The tower top inlet should be set with a conditioning valve in order to enter each
.The water level of the tower is uniform.
The noise is measured at dm1.13VL-W at the equivalent diameter of the cooling tower (Dm1.13VL*W), 1.5 meters above the ground height, wherein L and W are the shape rulers of the tower
inch long and wide).
The use of cellular continuous blister series of diversion,heat dissipation, water collection three-in-one native filler, the whole suspension, gravity cloth water, low drop of water, with cold effect
High, low energy consumption, less drift water, less noise and so on, floating water rate is less than 0.001%.
When connecting different types of towers, the bottom basin water level height of different types of towers must be taken into account, and the base height must be adjusted to maintain the water level balance of the towers.
Model NO.: RGEC-SA
Application: Ports/Docks
Certification: SGS ABS BV
Trademark: jiangsu
Transport Package: Container
Specification: Weight: 62kg-6400kg
Origin: Jiangsu, China (Mainland)
Super Arch Yokohama Fender