evaporator core specification:

1.Can be used in some industrial area.

2. Fin: flat or corrugated aluminum foils; hydrophilic or bare fin.

3. Tube: copper pipe

4. Φ7mm, φ7.94mm, φ9.52mm ,φ12.75mm, φ15.88 of tube O.D. available

5. Customized service is available according to customer's drawings to meet end user's specified requirements.

6. Materials of fin and tube per customer's need, it could be aluminum, copper or stainless steel

7. Leak  test: 2.5Mpa water test

8. Producing process: tube bend, press fins, expand tube, welding, leak test, dry, inspect, pack.

 

evaporator core  feature:

1. fin type: Flat fin, Window fin, louver fin, Smooth sine wave fin
2. copper pipe: diameter 7mm or 8mm or 9.52mm ,grooved or smooth tube
3. pitch of holes and pitch of rows : 25*21.65MM and 12.7*19.05MM
4. voltage: 220V/1/50HZ and 380V/3/50HZ or other type.
5. different alternative condensing fans available: shaded pole or outer rotor fan motor.
6.did gas examination under 3.0Mpa air pressure to ensure the tightness.
7.widely used in refrigeration industry, cold room and other cooling system.
8. we can supply products as per customized samples or drawing.

If you have do not which model is suitable for you please tell me the below information .

Then we can help you and save time for you.

This for all most heat exchanger:

 

 

 

 

evaporator core sample  policy:

1. We charge for samples. If we have the samples you need in stock, we can send it to you within one week after received payment.

 

2. We can also manufacture samples according to your drawings or samples; lead time depends on the actual production status in our factory.

 

 

 

Choose Us; Do Not Hesitate:

1) We can help buyers design specific products or produce products according to buyers' design 

 

2) We can print logo according to buyers' requirement

 

4) We has exported to many countries,such as Korea, USA, German, Canada etc.

 

5) Design term:We have professional design team.

 

6) Professional factory: We are manufacturer, specializing in manufacturing heat exchangers for over 10 years, competitive price with good quality.

 

7)Large productivity: 2000opcs per month.
8)Rapid response to your needs: We will reply within 24 hours after receiving you letter. If you have urgent thing, welcome to call us.

 

9)The Most Efficient Service, Best Quality and Excellent Reputation.

 

Contact us

Yolis zhou(Ms.)

Shanghai Shenglin M&E Technology Co.,Ltd 
Tel: +86 21 55890292 ext 205
Fax: +86 21 35324166 
Mob:+86 13262822519
 

 

 

 

evaporator core specification:

1.Can be used in some industrial area.

2. Fin: flat or corrugated aluminum foils; hydrophilic or bare fin.

3. Tube: copper pipe

4. Φ7mm, φ7.94mm, φ9.52mm ,φ12.75mm, φ15.88 of tube O.D. available

5. Customized service is available according to customer's drawings to meet end user's specified requirements.

6. Materials of fin and tube per customer's need, it could be aluminum, copper or stainless steel

7. Leak  test: 2.5Mpa water test

8. Producing process: tube bend, press fins, expand tube, welding, leak test, dry, inspect, pack.

 

evaporator core  feature:

1. fin type: Flat fin, Window fin, louver fin, Smooth sine wave fin
2. copper pipe: diameter 7mm or 8mm or 9.52mm ,grooved or smooth tube
3. pitch of holes and pitch of rows : 25*21.65MM and 12.7*19.05MM
4. voltage: 220V/1/50HZ and 380V/3/50HZ or other type.
5. different alternative condensing fans available: shaded pole or outer rotor fan motor.
6.did gas examination under 3.0Mpa air pressure to ensure the tightness.
7.widely used in refrigeration industry, cold room and other cooling system.
8. we can supply products as per customized samples or drawing.

If you have do not which model is suitable for you please tell me the below information .

Then we can help you and save time for you.

This for all most heat exchanger:

 

 

 

 

evaporator core sample  policy:

1. We charge for samples. If we have the samples you need in stock, we can send it to you within one week after received payment.

 

2. We can also manufacture samples according to your drawings or samples; lead time depends on the actual production status in our factory.

 

 

 

Choose Us; Do Not Hesitate:

1) We can help buyers design specific products or produce products according to buyers' design 

 

2) We can print logo according to buyers' requirement

 

4) We has exported to many countries,such as Korea, USA, German, Canada etc.

 

5) Design term:We have professional design team.

 

6) Professional factory: We are manufacturer, specializing in manufacturing heat exchangers for over 10 years, competitive price with good quality.

 

7)Large productivity: 2000opcs per month.
8)Rapid response to your needs: We will reply within 24 hours after receiving you letter. If you have urgent thing, welcome to call us.

 

9)The Most Efficient Service, Best Quality and Excellent Reputation.

 

Contact us

Yolis zhou(Ms.)

Shanghai Shenglin M&E Technology Co.,Ltd 
Tel: +86 21 55890292 ext 205
Fax: +86 21 35324166 
Mob:+86 13262822519