Metal 3D Printer,Ceramic Sand Casting Molds,Advanced Metal 3D Printer,Compact Binder Jet 3D Printer Guangdong Fenghua Zhuoli Technology Co., Ltd , https://www.fhzl-3dprint.com
2. The quality of seamless trolley line is not qualified.
When some customers purchase trolley wires or purchase trolley wires through middlemen, the cost is reduced to a greater extent, and the price requirements are particularly high, so it is easy to buy unqualified safety trolley wires.
This type of trolley wire cannot meet the normal use standards because of the failure to use raw materials, mechanical strength, and electrical conductivity. After a certain period of use, the casing may be deformed or damaged, which will directly affect the normal use of the product. It is recommended to use a good quality trolley wire produced by regular manufacturers to ensure the product life and reduce the failure rate.
3. The ambient temperature of the workshop is too high The temperature of the customer's workshop is too high, and PVC accessories such as hanging clips are prone to softening, leading to deformation of the guide rail guide rails. It is recommended to use a heat shield locally and add a sun visor outside.
1. If the spacing between the clips is too large or loose, if the cost is reduced and the number of lifting clips is reduced, the distance between each hanger is too large, and rail deformation may also occur. It is recommended to set the hanger spacing according to national standards and increase the number of hanging clips. And regularly install the trolley line overhaul.