Nickel-based Laser Cladding Powder is a type of powder material used in laser cladding processes. Laser cladding is a technique that involves using a high-energy laser beam to melt and fuse a powdered material onto a substrate, creating a protective or functional coating. Ni Based Powder,Inconel 718 Powder,Nickel Base Powder,Inconel 625 Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.lygoldentool.com
Marshall stability meter large-screen graphics LCD display can directly display the stability value, flow value of the test data and curves, test time. The display effect of the Chinese character display test is intuitive, and 100 sets of test data and test time can be stored internally. The test can be viewed at any time, the test is completed automatically, and the test can be automatically reset. The machine is equipped with an RS232 serial communication port, which facilitates communication with the host computer. The computer processes data, stores, prints, and displays the data. It can also be controlled and printed by a computer. The machine has manual control of rising, falling, and stopping at the same time. Features.
Use cautions:
1, the instrument power ground wire must be individually grounded.
2, pressure and flow sensor plug can not be inserted into the wrong; if not inserted into a direction can be inserted.
3. If the power grid has large interference, or if the voltage fluctuates fluctuately, the qualified users will be equipped with AC clean power, and the unconditional users will be equipped with an AC voltage regulator.
5, load part of the control line and printer cable can not be forced.
7. The instrument should not share a power socket with a high-power appliance.
8, the instrument should be placed in a dry place, do not often pull connector to prevent poor contact with the plug.
9. In humid areas, the sensors should be stored in a dry box.
10. When the instrument is not in use, cover it with a cloth to prevent dust from intruding.
11, please do not open or disassemble the instrument.
12. Before use, the instrument must be energized for more than 10 minutes.