Product Description
Silica Anti Corrosive Pigment, with white
powder appearance, is mainly composed of calcium ion-exchanged amorphous silica
gel. This new-developed Nanotechnology, without toxic and heavy metal, matches
the environmental regulations. It can exchange calcium ions for the paint film
and hydrogen ions on the substrate, to neutralize the acidic substances, maintain
a high pH value, and prevent the substrate from erosive.
Meanwhile, the
calcium ions can be combined with the metal oxide film to form a protective
layer to protect the steel substrate, reduce corrosion, and prolong the service
life. Ion exchange anti-corrosive pigments do not contain heavy metals, toxic,
which provides a certain degree of rust protection.
Feature
1,Lower A/C
pigment addition levels vs. existing IES pigments
2, Lower interaction with catalysts
3, Low sensivity to prolonged
dispersion time.
Application Fields
Coil Coating,
Appliance Finishes, Transportation and Heavy-Duty, Equipment Coatings, Metal
Furniture Finishes.
Anti Corrosive Pigment, Silica Anticorrosion Pigment, Ion-exchanged Amorphous Silica Guangzhou Quanxu Technology Co Ltd , https://www.silicamattingagent.com
No.
      item
Parameter(all is subject to our final design)
1
 Suitable raw material
Type
Common galvanized & pre-painted steel
Yield strength
235MPa(or other high strength steel)
Thickness(mm)
0.4-0.7
width(mm)
According to final design
2
Manual uncoiler's capacity
Max.5tons
3
Forming speed(m/min)
About 18-20m/min
4
Main motor power(KW)
7.5kw
5
Hydraulic power(KW)
3kw
6
Forming roller groupsÂ
Around19-20Â groups
7
Raw material of forming roller
High quality No.45 steel
8
Raw material of cutting blade
Cr12mould steel with quenched treatment
9
controlling system
Mitsubishi PLC& converter
10
Suitable industrial voltage
 According to your special requirement
11
Machine dimensions(L*W*H)
6.8m×1.8m×1.52m
12
Machine weight
About 9-10tons
Roof Panel Roll Froming Machine; Steel Corrugated Sheet Forming Machine; Steel Sheets Forming Machine; Roll Forming Machine; Forming Machine; Cold Roll Forming Machine; Steel Corrugated Forming Machine.
Components:
The Uncoiler and Its Base
Coil Sheet Guiding and Adjusting Equipment
Film Covered Device
Main Roll Forming System
Post-Cutting Device
Hydraulic Station
PLC Control System
Support Table
The Technical Parameters:
Suitable Raw Material: Color Steel Sheet; Galvanized Steel Sheet
Thickness of The Material: 0.4m to 0.7mm
Yield Strength of Material: 235mpa
Uncoiler's Loading Capacity: Max. Capacity: 5000kgs. (Can Be Increased to Be 10 Tons)
Forming Speed: About 15m/Min
Main Motor Power: 5.5kw(Depend on Final Design)
Hydraulic Station Power: 2.2kw(Depend on Final Design)
Controling System: Mitsubishi PLC & Converter
Voltage: 380V, 3 Phase 60Hz or According to at Buyer's Requirment.
The Quantity of The Roller Group: At Lest 15 Groups(Depend on Final Design)
Machine Dimension: About 20m*1.5m*1.4m(Depend on Final Design)
Total Weight: About 10000kgs(Depend on Final Design)
Material of Roll Former System
Roller: High Grade No. 45 Forged Steel, Plated Hard Chromed on The Surface of Rollers
With Thickness 0.05mm.
Active Shaft Material: High Grade No. 45 Carbon Wrought Steel at Diameter 75mm.
Cutting Blade: Cr12 Mould Steel with Quenched Treatment.
Working Flow
Decoiling The Sheet---Guiding The Sheet---Covering The Film---Roll Forming---Measuring The Length---Cutting The Panel---Panels to The Supporter
Model NO.: panel forming machine
Profile Size: Can Design Accoridng to Your Sample or Drawings
Drive Way: Chain or Gear Box
Delivery Time: 30 Days Finished and 10 Days More to Test
Operating: One Experienced Person Is Enough
Size: Depends on Final Design
transportation: by Sea or Train
Trademark: STW
Transport Package: Machine in 40′′gp,Other Accessories in Wooden Case
Specification: CE
Origin: China
HS Code: 84552210