Thrust roller
bearings
Thrust roller bearings includes self-aligning
thrust roller bearings, tapered roller thrust bearings, cylindrical roller
thrust bearings and needle roller thrust bearings.
Structures:
1. 29000 type thrust self-aligning roller bearings, this
type of bearings can carry both axial and radial load in which mainly is axial
load. And it has low friction coefficient and fine self-aligning property. The roller
of this bearing is unsymmetrical spherical roller, which can reduce relatively
slip between roller and raceway in the operating. Also the long roller has big
diameter and much quantity, so the load capacity is high. Generally it adopts
oil lubrication, but under low speed circs will be grease lubrication.
NXZ mainly
produce the following structures:
2.80000 type thrust cylindrical
roller bearings and 90000 type thrust tapered roller bearings, this type can
accommodate single-direction axial load, they have much higher axial
carrying-capacity than thrust Ball Bearings; in additional, they have high
rigidity and take up smaller space.. The thrust cylindrical roller bearings are
applied in operation with low rotation speed; the rotation speed of thrust tapered
roller bearings is a little higher than thrust cylindrical roller bearings.
3.350000 type double-directions thrust tapered roller bearings (SKF
code), this type can accommodate larger double-direction axial load.
4.
TTSV and TTSX type thrust full tapered roller bearings used on pressing-down
device of mill, this type is full complement roller, can accommodate larger
single-direction axial load.
Cage
materials
Brass, brozen or steel solid cages are
adopted.
Permissible
tilt angle
The bearing
axis of thrust tapered roller bearings and thrust cylindrical roller bearings
are not permitted to be inclined. The bearing axis of thrust self-aligning
Roller Bearing is permitted to be inclined, when the equivalent static load P0a≤0.05C0a,
and when the shaft washer is slewing, the permissible tilt angle is:
Bearing
series Permissible tilt angle
292
series 1.5°
293
series 2°
294
series 2.5°
The
permissible tilt angle will decrease with the increase of the load.
Minimum
axial load
When the bearings are slewing, as the rolling
bodies are acted by centrifugal moment, the rolling bodies will slid with
reference to the raceway, which will cause the shaft washer and housing washer
to be separated. In order to ensure the normal operation of the bearings,
certain axial load must be put on the bearing. The minimum axial load required
is:
Thrust tapered roller bearings and thrust
cylindrical roller bearings
C0a/1000≤Famin>A(n/1000)2
Thrust self-aligning roller bearings
C0a/1000≤Famin>1.8Fr+A(n/1000)2
In
the equation: Famin Minimum
axial load (kN)
Fr Radial load (kN)
C0a
Basic static load rating (see bearing dimension table) (kN)
A Minimum load constant (see bearing
dimension table)
n Rotational speed (r/min)
When the actual load acted on a bearing is
less than the minimum axial load computed, a spring or other measures must be
used to preload the bearing.
Dynamic
equivalent axial load
Pa=Fa (Thrust tapered roller bearings and
thrust cylindrical roller bearings)
When Fr≤0.55Fa Pa=Fa+1.2Fr (Thrust self-aligning roller bearings)
Static
equivalent axial load
P0a=Fa (Thrust tapered roller bearings and thrust
cylindrical roller bearings)
When Fr≤0.55Fa P0a=Fa+2.7Fr (Thrust
self-aligning roller bearings)
Thrust Spherical Roller Bearing,Thrust Spherical Roller Bearing,Thrust Tapered Roller Bearing,Full-Type Tapered Roller Thrust Bearing Xibei Bearing Co.,Ltd. , http://www.nxzjck.com
At present, these eight new product projects are being intensified, and some projects have entered the trial and evaluation stage. After the successful development of these new products, it will bring great economic benefits. For example, the 3.5~4.5m/min high-speed extrusion die of the main profile will greatly improve the production efficiency and reduce energy consumption.
In order to maintain its leading position in the industry, Sanjia Technology Co., Ltd. extrusion mold factory closely follows the industry technology development trend to develop new products. This year, they have identified eight major product development projects, namely 3.5~4.5m/min high-speed extrusion die for main profile, wpc molding die, extrusion integration system, extrusion die design flow information software, American profile extrusion die design specification, The development of fully coated co-extrusion molds, the elimination of the inner space of foamed products, and the relief molding of profile surfaces.