Deep Stamping Products, it can also be called Deep Metal Stamping Parts, Deep Processing Metal Stamping Parts, or Deep Processing Stamping Parts.
Dongjie can produce stamping parts according to your drawings. Dongjie has more than 1500+ sets of molds and has a professional technical and design team. We can meet your requirements as much as possible. You are welcome to come to consult your drawings.
Stamping Parts,Metal Stamping Parts,Drawing Metal Stamping Parts,Carbon Steel Metal Stamping Parts Anping County Dongjie Wiremesh Products Co., Ltd. , https://www.dongjiewiremesh.com
QVC Series Pneumatic vacuum loader is widely used in automatic feeding material forTablet Press, pulverizer, capsule filling machine, vibration sifter, packing machine, Mixer and etc. It doesn't need any mechanical vacuum pump, so it is simple structure, Small volume, without repairing, no noise and easy being controlled. It can be stopped separating layer for the feeding material because the machine has high vacuum. QVC Series Pneumatic Vacuum Conveyer was designed according to international standard. It is easy cleaned and beautiful. It is up to GMP requirement.
CHARACTERISTIC:
Solve the problem thoroughly about the separating layer of material.
The sintered-metal filter is Japanese original.
It can be removed the material static electricity.
It is airtight without crossed contamination.
It is made in good quality stainless steel(304 or 316L).
It is made in non-toxic and corrosion resistant material.
Filter is easy cleaned.
It is controlled intelligently and automatically.
It is easy dismantled with building blocks structure.
It is easy set up and small volume, the weight is light
It is no noise and screening
It is economical and practical the cost is lower.
Pictures for QVC-4 pneumatic vacuum loader
Technical parameters:
Model
Capacity(kg/h)
Compressed Air(L/min)
MPa
QVC-1
350
180
0.4-0.6
QVC-2
700
360
0.4-0.6
QVC-3
1050
540
0.4-0.6
QVC-4
1500
720
0.4-0.6
QVC-5
3000
1440
0.4-0.6
The die used for stamping is called a stamping die, or stamping dies for short. A die is a special tool that processes materials (metal or nonmetal) into the desired parts in bulk. A stamping die is very important in stamping, without meeting the requirements of a stamping die, batch stamping production is difficult to carry out; Without advanced stamping die, the advanced stamping process can not be realized. The stamping process and die, stamping equipment and stamping materials constitute the three elements of stamping processing, only they can be combined with each other to get stamping parts.
Stamping is a metal cold deformation processing method. Therefore, it is called cold stamping or sheet metal stamping or stamping for short. It is one of the main methods of metal plastic processing (or pressure processing), and it also belongs to material-forming engineering technology.
Model NO.: QVC
Customized: Customized
Condition: New
Warranty: 1 Year
Trademark: UNIMACH
Transport Package: Wooden Case
Specification: QVC
Origin: China
APPLICATION