Depending on the temperature you wish to heat the seat to, this quality heated seat allows for temperature adjustment from 30-degrees C to 60-degrees C. With this, you can easily select on the appropriate temperature for every situation. That said, it has been equipped with a digit controller timer for easy preprogramming when to heat. It features a headrest strap that has a buckle clip, which offers a hook and loop closure.
The good thing is that the seat is very comfy thanks to the soft cushion pad. The auto heated sear cushion is very safe and non-slip. Seat Heater Cover,Car Seat Heater Cover,Heated Neck Pads,Heated Carbon Fiber Seat Pads JiLin Province Debang Auto Electric Co.,Ltd. , https://www.dbheatedpads.com
In the winter, the closet is full of cold equipment, so are you prepared for the season of your car? Let me work together to make a comprehensive inspection and full equipment for the car.
First, the appearance of conservation:
(1) The car should be washed in time after snow days to remove snow water with acidic and corrosive substances, so as to avoid damage to car paint and premature rust.
(b) Washing vehicles in winter should use warm water. Do not rinse directly with cold water. In particular, after the engine is warmed up, the cold water wash cools down quickly, causing paint cracking on the hood surface. After washing, promptly open the door to dry the water traces, prevent the residual water from freezing at the seams, freeze the door, and do not force the switch when the windows are frozen.
Second, oil conservation:
(1) Special oil should be replaced in winter. To prevent the viscosity of ordinary lubricants from deteriorating due to the drop in temperature, resulting in difficulty in cold start of the car, and serious accidents such as the burning of the bearing bush and the shaft.
(b) The freezing point of the antifreeze should be lower than the minimum temperature of about 10°C in the area, at least once every two years. Water has been added to the antifreeze and the antifreeze must be replaced.
Third, electrical maintenance:
(a) The winter automobile consumes a large amount of electricity and it is necessary to provide timely battery care. Remove oxides from the battery headers and add distilled water. Too low a temperature will greatly reduce the battery capacity and it is better to perform a thorough charge. The average battery life is two to three years. If the battery has reached the end of its useful life, especially the automatic car, it is best to replace it in advance to prevent accidents.
(2) When the cold start is difficult, it shall be started again every 30 seconds or so. Continuous ignition shall be avoided to prevent the starter from being damaged and the battery draining power.
(C) The temperature difference between the inside and the outside of the car in winter is large, and the windows are likely to fog and affect the line of sight. Therefore, it is necessary to maintain the electric heating wire of the windshield, side window air outlet and rear window in good condition.
(4) In the winter, the vehicle should be started by ignition. After the engine is working normally, the headlights and other electrical equipment should be switched on. When the vehicle is parked, the electrical appliances should be turned off first, and then the flame should be turned off. The parking should not use as much power as possible, especially the power windows and headlights. Audio and other equipment that consumes large amounts of electricity. IV. Chassis:
(a) Winter rain and snow, roads after the snow, salt water, the car chassis is always directly deal with rain and snow, it is easy to rust. Tires will throw snow with high salinity onto the chassis of the car, making the chassis of the car susceptible to rust. Therefore, before the winter, you should give the chassis a rust-proof care. When you are in the snow, you are not afraid to damage the chassis.
Fifth, car seat:
In winter, the temperature is getting lower and lower, and many car owners can't stand the coldness of leather, eager to get a new ride. As the saying goes, "a good horse with a good saddle" is a must for warm car seats (especially with a backrest) for winter cars, and sheep sheared car seats are just one of the products that can be purchased.
The so-called sheep shearing is to cut the cashmere after the remaining cashmere with a knife, after anti-corrosion treatment, and then dyeing, processed into sheep sheared carpets, cushions, cushions and other indoor supplies.
Identification and price, from the perspective of origin, leather wool cushion sheepskin from the source mainly in Australia, Inner Mongolia and other regions, the cheapest hair quality is also superior, so the current market, the real sheep shearing cushions are more than a thousand dollars, the most The average popular sheep shear cushion is priced at around 1400 yuan.
From the product's point of view, it is not easy to distinguish the naked eye, you can see a few hair with a fire and a fire, the real hair will be the same as the hair into a gray, artificial hair ash into particles. Maintenance and care, currently retailers are not responsible for cleaning sheep shearing cushions, and the average dry cleaners even if the use of dry cleaning methods to wash, it is difficult to restore the original luster. The more glossy the seat cushion is, the more combs are used for finishing the fur and maintain the original color and shape; tapping the surface of the fur with a small stick can hit the dust on the surface of the fur. If it is a slight dust, use a clean cotton cloth to dip a small amount of neutral detergent with warm water or gently wipe with a volatile oil. The water temperature should not be too high. If the stain is too severe, it must be sent to a dedicated dry cleaner for cleaning. During storage, if insect repellents or mothballs are used, they should be wrapped with breathable tissue paper to avoid direct contact with the skin.
Sixth, the door:
Door winter, in addition to the engine should be insulated, but also should prevent the door from freezing, so as not to open when used. To do this, you can inject a little lubricating oil into the door lock hole and seal it around the door.
