Hikvision Wireless Bridges Frequently Asked Questions in Monitoring Installation

In recent years, the mature development of wireless technology has provided a good catalyst for the development of video surveillance. With the popularity of more and more place monitoring systems, wireless technology has entered the streets, but during the installation process, the system There are more complicated technical requirements, and beginners will have a lot of confusion about this. To this end, we will answer some of the key technology questions below for everyone to enjoy.
1 Hikvision wireless bridge signal strength and whether there is interference and other elimination methods
(1) The signal strength of the network is greater than or equal to -60DB, and the signal strength is above 65, which proves that the network is smooth.
(2) In the presence of common signal power of high voltage, telecommunications, and mobile towers, the frequency is around 4200-7000 to detect, screen one by one, or test the frequency band with third-party software.
(3) Simultaneous wired monitoring and wireless access. Suddenly the device cannot find the wired device or wireless IC, check if the IP conflicts, and restart after power failure.
(4) The wireless bridge is intermittent during semaphore transmission or packet loss is often caused by the ping command, which indicates that there is instability in the network transmission. Generally, it is sufficient to slightly adjust the installation position. If the fault remains after the position adjustment, then The transmission channel can be selected.

Hex Socket Head Screw

Hex Socket Head Screw,Button Head Screw,Allen Head Screw,Allen Head Bolts

Suzhou Chenran Precision Fasteners Co., Ltd. , https://www.chenranfastener.com

October 17, 2024