Pneumatic Parts Forming Machine
The SF-306 and SF-308 machines are Pneumatic radial components lead cutting machines. They all can be used to do those components: including Various parts, such as crystal, capacitance, resistance, etc., can be made into bending feet and can be matched with various forms of mould.But still have something different between them.
The type of SF-306 is a single cylinder type suitable for crystal, resistor, capacitor shear foot bending
The type of SF-308 is a Double cylinder type suitable for crystal, resistor, capacitor shear foot bending.
Pneumatic Parts Former,Pneumatic Mechanical Equipment,Pneumatic Component Cutting Lead Machine,Pneumatic Cutting Machine SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.singsunautomatics.com
IT type leg fender provides a compact solution to mounting fenders in limited areas. ME fenders have a narrower footprint than traditional leg fenders. They can be mounted behind a panel or pile. ME leg fenders can also be used with a UHMW-PE shield to provide a low cost alternative to an arch fender.
Characteristics
1. The design compress deformation is 57.5% and its energy absorption is around 10% higher than that of super arch (TD-B) fender.
2. Small installation scale provides it broader application range. TD-B500H fender's mounting bolt center distance is 840mm, much shorter than 600mm owned by TD-IT500H.
3. It enjoys facile design, suitable for vertical, horizontal as well as mixed arrangement.
4. The front part is fixed with frontal frame and pressure on fender face can be set according to specific need.
TD-IT400HX1000mmL Performance: