For steel scraps, whether it's turnings, chips, filings, shavings, cuttings, sawdust, drillings, borings, debris, granules or sludge, Ecohydraulic steel recycling machine can help. If your scraps are small chips, you can choose our Steel Briquette Machine to press your chips to be small blocks. If your scraps are shavings or turnings, you can choose our Steel Baler to press your chips to be square bales, if your scraps are big like pipe tube sheet plate rebar, etc., you can choose our steel shear to cut your scraps to be smaller pieces.
Steel Shavings Recycling Machine, Steel Turnings Recycling Machine, Steel Scraps Recycling Machine, Steel Chips Recycling Machine, Waste Steel Recycling Machine Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.yjhydraulicn.com
The gate plate slides on the surface of the two valve seats. The plate gate valve can be applied to the medium with suspended particles, and the sealing surface of the plate gate valve is actually positioned automatically. The seat sealing surface is not damaged by the thermal deformation of the valve body. And even if the valve is closed in the cold state, the hot elongation of the stem will not overload the sealing surface. At the same time, when the valve is closed, the plate gate valve without a diversion hole does not require a high accuracy of the closed position of the gate. Therefore, the electric plate valve can control the opening and closing position with a stroke.
Flat gate valve flow resistance is small, non-reduced flow resistance and short pipe flow resistance is similar. The flat gate valve with diversion hole is installed on the pipeline and can be cleaned directly with the pig.