Guilin's Capital Subsidy for Reconstruction of Small Coal-Fired Boilers Up to 500,000 Yuan The elimination of coal-fired boilers or the transformation of energy-saving and environmental protection is of great significance for improving air quality. It is understood that Guilin City will implement financial subsidies for the elimination of small coal-fired boilers or for energy-saving and environmental-protection enterprises. The maximum subsidy for individual enterprise units is 500,000 yuan. Guilin Municipality will carry out the rectification of coal-fired small boilers and will explicitly eliminate or renovate coal-fired boilers with an annual capacity of 10 tons of steam and below, and prohibit the construction of new coal-fired boilers with an output of 20 tons per hour or less. If coal-fired boilers are converted to natural gas, the following standards and one-time subsidies shall be used: the maximum subsidy for a single enterprise shall not exceed 500,000 yuan; 2 per kilogram of subsidy for steamed tons and below shall be 20,000 yuan; and 3 to 10 tons per ton for steam tons Million yuan; 11 tons per ton subsidies above 30,000 tons. If the existing coal-fired boilers that are in use are to be used for centralized heat supply, a one-off subsidy will be given at 30,000 yuan per steamer. The maximum subsidy for a single steam use unit does not exceed 500,000 yuan. For the temporary transition of biomass fuels on the basis of supporting dedicated combustion equipment and bag dust removal facilities, a one-off subsidy will be given at RMB 10,000 per ton. For the active implementation of "coal to gas" or cogeneration to implement central heating units to implement the task ahead of the implementation of incentives. For those units that have completed 2 steam distillation tons and below in the end of September 2015, a one-time award will be awarded at RMB 0.8 million per steam ton; The units of the boiler remediation task are given a one-time reward for each RMB 10,000 per steamer. Mianyang Sichuan investment 6 million subsidies for coal-fired boilers Mianyang City, Sichuan Province, to promote the city's industrial coal-fired boiler rectification work, this year will invest 6 million yuan of funds, the establishment of coal-fired boilers renewal and transformation of special grant funds. In accordance with the standard of RMB 30,000 per ton of steamed tonnage, a “one-for-one subsidy for coal-to-gas†and “coal-to-electricity†enterprises was granted. Enterprises that failed to complete renovations on schedule were ordered to suspend production. Except for collecting sewage charges in accordance with the regulations, the excessive discharge of smoke and other pollutants shall be subject to administrative penalties of up to 100,000 yuan in accordance with relevant laws and regulations. Mianyang City also delineated urban banned areas for high-polluting fuel, increased supervision of industrial coal-fired boilers, and used clean energy as a precondition for the establishment of new projects, environmental assessment, and construction. Accelerate the construction of centralized heating, coal-to-gas conversion, and coal-to-electricity projects, and eliminate decentralized coal-fired small boilers. The sooner companies implement subsidies, the more The implementation plan of the Jinhua Urban High-Contamination Fuel Boiler Renovation Program clarified that centralized heating or natural gas, electricity, and other clean energy transformation methods will be adopted, and the elimination of the 1479 high-pollution fuel boilers will be completed by the end of 2016, of which 438 will be completed in 2015. Above, and according to the phase-out transformation time to give differential subsidies, and encourage enterprises to support the implementation of phase-out transformation in advance. The implementation plan stipulates that differentiated policies and measures should be implemented to reward and punish people and encourage enterprises to complete the renovation in advance. Dismantling subsidy of RMB 0.3 million per unit for 0.5 tons of high-pollution fuel boilers that have been decommissioned and directly dismantled, and subsidy for subsidy of RMB 0.5 million per unit for sub-0.5 ton steam (inclusive); to be completed before the end of December 2015 The coal-fired (biomass) boilers, subsidy 80,000 yuan / steam ton, oil-fired boiler subsidies 40,000 yuan / steam ton; by the end of December 2016 to complete the transformation of the coal-fired (biomass) boiler, subsidies 60,000 yuan / steam tons , Oil-fired boiler subsidies 30,000 yuan / steam tons; 0.5 steam tons below 0.5 tons of steam to calculate; heat-conducting oil and other pressure boilers converted to 0.7 megawatts into a steam ton coal-fired boiler implementation subsidies. The gas company will also give certain preferential policies to coal-to-gas enterprises (units). 1. Decrease the pipe network's pre-burial fee and charge it according to the standard of 100 yuan / day / day. 2. Give the company 10% discount on natural gas pipelines and infrastructure construction investment (project cost) within the red line (only applicable to the construction projects of urban natural gas companies). 3, preferential gas prices. During the period from 2015 to 2017, enterprises that have completed the phase-out or reconstruction of coal-fired boilers are required to provide priority gas supply and price concessions. The gas prices are, in principle, controlled within the provincial gate station price of RMB 0.6 yuan/cubic meter. Failure to be eliminated on time will be punished Enterprises that do not phase out retrofitting highly polluting boilers will be subject to mandatory measures. In the illegal buildings, "triple play" companies and unapproved high-polluting fuel boilers, they will not enjoy financial subsidies after they are demolished; enterprises that have not completed the rectification within the specified time will take compulsory measures to eliminate them, and at the same time cancel the company's boilers. The reform of financial capital subsidies qualifications; environmental protection departments in accordance with the unified deployment of the provincial government, the concentration of pollutants or total amount exceeding the standard, double the standard to impose sewage charges, the concentration of pollutants and the total amount of emissions at the same time, according to the standard plus Double charge for sewage. Stamping is a manufacturing process that involves applying pressure to a material to deform it into a desired shape or size. There are various types of stamping processes utilized in the industry, each with its unique set of advantages and disadvantages. In this article, we will describe some of the most common types of stamping processes.
Overall, stamping is a versatile manufacturing process that plays a crucial role in the production of a wide range of metal parts and components. By understanding the different types of stamping processes, manufacturers can select the most suitable process for producing high-quality parts in an efficient and cost-effective manner.
hardware stamping products, stamping part products, Precision Metal Stamping, precision metal stamping part, Stamping Processing Products NINGBO CITY YINZHOU RUICAN MACHINERY CO.,LTD , https://www.nbsandcasting.com
Blanking: Blankings are flat pieces of sheet metal that have been precisely cut and punched out from larger sheets of metal. Blanking is a process used to produce these flat pieces, and is ideal for producing large quantities of uniform, flat parts.
Coining: Coining is a stamping process used to create impressively flat and precise features - often used in creating coins or bearing seals.
Drawing: Drawing involves pulling a flat piece of metal through a die with a punch tool to form it into a three-dimensional shape. This process is commonly used in the creation of products such as automobile fenders, cans, and ship hulls.
Embossing: Embossing is the process of applying raised designs or patterns to a flat piece of metal by impressing the metal with a die. This process is popularly used in the production of decorations and signage.
Piercing: Piercing is the process of punching or drilling holes in a metal sheet. It is widely used in creating products such as luggage tags, name plates, and metal attachments.
Blanking and forming: Blanking and forming involve using a single die to create a part that has a variety of features, both flat and formed. It is a highly efficient process for creating complex parts.
