In microwave drying equipment, the application of microwave technology instead of traditional technology must pay attention to the improvement of economic efficiency. The failure of many early projects is often not a technical problem, but the economic benefits are not good enough. Microwave drying equipment is a high-tech product. Through the efforts of the past two decades, the level of development and production of microwave drying equipment in China has been greatly improved. Design has become more reasonable, quality has been improved, costs have been gradually reduced, and automation and after-sales services have been improved. Users of microwave drying equipment have seen an accelerated growth in recent years. Microwave drying equipment The user can estimate the required microwave power based on the difference between the initial and final moisture content of the material to be treated and the output requirements. The initial construction cost is estimated based on the investment cost of the microwave equipment, so as to calculate the economic benefits. In most cases, due to the outstanding energy-saving effect after the application of microwaves, the direct benefits are very obvious. In some cases, the direct economic benefits are not obvious, and even increase the cost. For example, if the equipment sterilizes food for microwaves, the cost may increase due to an additional process. However, due to prolonged shelf-life, the overall benefit is still good. And the social benefits of the benefits to people's health are even more commendable.
Nitrogen compressor is one Gas Compressor used to increase nitrogen pressure. Normal nitrogen pressure at the outlet of Nitrogen Generator is 5-10 bars. For some customers, they need high puressure nitrogen such as 30 bars or 150 bars or 200 bars. Piston nitrogen compressor is the most popular type.
Nitrogen compressor specifications:
Code
Item
Unit
Specification
1
Model No.
VW-45/6-32
2
Structure
Two stage, skid mounting
3
Medium
Nitrogen
4
Rated suction pressure
MPa(g)
0.6
5
Rated outlet pressure
MPa(g)
3.2
6
Capacity
Nm3/h
45@ suction pressure=0.6MPa(g)
7
Rotation speed
rpm
680 ※
8
Motor power
kw
5.5 ※
9
Cooling type
Wind cooling
10
Drive type
Belt
11
Inlet temperature
℃
≤35
12
Outlet temperature
℃
≤55
13
Inlet joint
DN25
14
Outlet joint
DN15
15
Control
Automatic
16
Weight
KG
360 ※
17
Dimension(length*width*height)
mm
1200*900*950 ※
18
Installation
Flat concrete ground
Nitrogen Compressor,Oilless Nitrogen Compressor,Nitrogen Air Compressor,High Pressure Nitrogen Compressor Shandong Gamma Gas Engineering Co. Ltd. , https://www.gammagases.com