Product Name: SS304 SS316L Pneumatic welded Butterfly Valve with Solenoid Valve  Product Name: SS304 SS316L Pneumatic welded Butterfly Valve with Solenoid Valve Â
Multi-fuel options: Biomass burn various kinds of biomass raw materials or molding biomass particles ( Wheat straw, rice straw, corn stalks, corn cobs, peanut shells, cotton stalks and etc. of the crop, as well as branches, leaves, bark, roots, wood chips, bamboo powder, sawdust and other leftovers of forest products, which are cheap and inexhaustible).
The advantages of YGS-900,000Kcal/h Biomass Pellet Burner for Sales:
1.Less investment, quick capital recovery;
2.Convenient transportation, transportation radius small, fuel price stability;
3.Convenient operation, safe, long service life;
4.Wide range of load adjusting, strong adaptability
5.This biomass pellet burner can match to the user`s heat devices,energy saving and environmental protection.
Technical Parameter /Specification details of biomass pellet burner machine
Heating Power
(Kcal)
Weight
(T)
Heating for boiler
(T)
Product Show:
Biomass Pellet Burner Biomass Pellet Burner,Biomass Wood Pellet Burner,Save Energy Biomass Pellet Burner,Air-cooled Biomass Pellet Burner Shandong Rotex Machinery Co.,Ltd , http://www.woodpelletmachinery.com
SS304 SS316L Pneumatic welded Butterfly ValveÂ
 welded Butterfly Valve with Solenoid Valve
Technical Parameters
Standard
3A,SMS,DIN,ISO,RJT,IDF
Product wetted steel parts
AISI304/AISI316L
Provided with material inspection report
Other steel parts
AISI304
Size
1/2"~6",DN10~DN150
Seal material
EPDM/VMQ/FPM
All seals material comply with FDA21CFR117.2600
Working pressure
≤10bar(145psi)
Supply pressure for air actuator
5~8(0~116psi)
Working temperature
EPDM:-14~248ºF(-10~120ºC)
VMQ:-58~356ºF(-50~180ºC) FPM:22~446ºF(-30~230ºC) Other materials are avaible upon request
Sterilization temperature
302ºF(150ºC,max 20min)
Outside surface treatment
Ra16~32uin(o.4~0.8um)
Inside surface treatment
Ra32~64uin(o.8~1.6um)
Connetion ends
butt-weld,clamped ends,male ends, flange ends
Pneumatic head
Normally closed(NC)-Air to open,spring to close
Normally open(NO)-Air to close,spring to open Air to air(AA)-Air to open,air to close
1.The seat and gasket can be NBR (Nitrile), VMQ (Silicone) or Viton (FPM) all complying with FDA 21CFR177.2600.
2. End connection can be butt-welded, sanitary clamp, threaded, flanged, I-line or others upon request.
3.Handle: 3-position pull handle; multi-position handle in either pure stainless steel or with plastic cover.
4.Actuator: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), electric actuator.
5.Control: position sensor, C-top controller, C-top controller (AS-I)
Design Features
1.Various standards can be provided: DIN, 3A, SMS, ISO / IDF, BS / RJT, and ASME / BPE.
2.Available in sizes from DN25 / 1" to DN300 / 12"
3.Multiposition handles can be used for valves up to DN100 / 4";Â
4.Pull handles can be used for valves from DN25 / 1" to DN300 / 12"
Manual handle,Â
5.pneumatic actuator and electric actuator are interchangeable.
6.Seals comply with FDA 21CFR 177. 2600.
7.The valve body can be customized with a wide selection of different connections.
Butterfly valves can be actuated either manually or pneumatically. There is a wide range of manual controls to meetÂ
the different system requirements. Pneumatic controls can be horizontal and vertical, single-, double-effect, and modulating. They can be fitted with control tops and proximity It is widely applied to many fileds,such as
beer,beverage,dairy food,fruit juice,pharmacy,biological etc.
Our Service
On Samples
Buyer bear the air fee, but this fee will be reduced from order directly
On After Sales
Free replacement if there is any quality problem
On Delivery
Never delay delivery timeÂ
On Materials
Ensure material pure
Ensure material pure
Welcome Â
Packing&Shipping information and pictures of  SS304 SS316L Pneumatic welded Butterfly Valve with Solenoid Valve
Port:Shanghai Port or Ningbo Port,China
MOQ:1 set
Supply ability:1,000 sets/month
Payment terms:T/T,Western Union, Paypal, L/C
Packaging:Shrink wrapped-in seaworthy wooden cased
Delivery time:Depends on quantity
Shipping mode:By sea,by air,by express
1.Sanitary Valves,such as butterfly valves,check valves,diaphragm valves,ball valves,pneumatic reversal valves,ect.
2.Sanitary pipe fittings,such as triclamp ferrule,elbow,tee,reducer,spray valve,sight glass,strainer,ect.
3.Sanitary Pumps,such as Sanitary Centrifugal Pumps,Sanitary Rotary Lobe Pumps
4.Sanitary Manhole Covers,such as square/round/elliptical manhole covers
Sanitary Valves
Sanitary Butterfly Valves
Sanitary Check Valves Sanitary Ball Valves Sanitary Divert Valves Sanitary Diaphragm Valves Sanitary Sample Valves Sanitary Control Valves Sanitary Mixproof Valves
Sanitary Pipe Fittings
Sanitary Elbow
Sanitary Tee Sanitary Reducer Sanitary Cross Sanitary Triclamp Ferrule Sanitary Cap Sanitary Pipe Hanger Sanitary Tank Cleaning Ball Sanitary Hose Joint Sanitary Unions Sanitary Sight Glass Sanitary Strainer
Sanitary Manways
Sanitary Round Manway without Pressure
Sanitary Round Manway with Pressure Sanitary Square Manway Sanitary Oval Manway
Sanitary Pumps
Sanitary Centrifugal Pump
Sanitary Lobe Pump Sanitary Self Priming Pump
Sanitary Tanks
Storage Tank
Fermentation Tank Mixing Tank Warm-keeping Tank
Sanitary TubeÂ
Seamless TubeÂ
Weldless Tube
Sanitary Gasket
Silicone/EPDM Gasket for Triclamp
Silicone/EPDM Gasket for Union Silicone/EPDM Gasket for Butterfly Valve Silicone/EPDM Gasket for Manhole Cover
SS304 SS316L Pneumatic welded Butterfly ValveÂ
 welded Butterfly Valve with Solenoid Valve
Technical Parameters
Standard
3A,SMS,DIN,ISO,RJT,IDF
Product wetted steel parts
AISI304/AISI316L
Provided with material inspection report
Other steel parts
AISI304
Size
1/2"~6",DN10~DN150
Seal material
EPDM/VMQ/FPM
All seals material comply with FDA21CFR117.2600
Working pressure
≤10bar(145psi)
Supply pressure for air actuator
5~8(0~116psi)
Working temperature
EPDM:-14~248ºF(-10~120ºC)
VMQ:-58~356ºF(-50~180ºC) FPM:22~446ºF(-30~230ºC) Other materials are avaible upon request
Sterilization temperature
302ºF(150ºC,max 20min)
Outside surface treatment
Ra16~32uin(o.4~0.8um)
Inside surface treatment
Ra32~64uin(o.8~1.6um)
Connetion ends
butt-weld,clamped ends,male ends, flange ends
Pneumatic head
Normally closed(NC)-Air to open,spring to close
Normally open(NO)-Air to close,spring to open Air to air(AA)-Air to open,air to close
1.The seat and gasket can be NBR (Nitrile), VMQ (Silicone) or Viton (FPM) all complying with FDA 21CFR177.2600.
2. End connection can be butt-welded, sanitary clamp, threaded, flanged, I-line or others upon request.
3.Handle: 3-position pull handle; multi-position handle in either pure stainless steel or with plastic cover.
4.Actuator: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), electric actuator.
5.Control: position sensor, C-top controller, C-top controller (AS-I)
Design Features
1.Various standards can be provided: DIN, 3A, SMS, ISO / IDF, BS / RJT, and ASME / BPE.
2.Available in sizes from DN25 / 1" to DN300 / 12"
3.Multiposition handles can be used for valves up to DN100 / 4";Â
4.Pull handles can be used for valves from DN25 / 1" to DN300 / 12"
Manual handle,Â
5.pneumatic actuator and electric actuator are interchangeable.
6.Seals comply with FDA 21CFR 177. 2600.
7.The valve body can be customized with a wide selection of different connections.
Butterfly valves can be actuated either manually or pneumatically. There is a wide range of manual controls to meetÂ
the different system requirements. Pneumatic controls can be horizontal and vertical, single-, double-effect, and modulating. They can be fitted with control tops and proximity It is widely applied to many fileds,such as
beer,beverage,dairy food,fruit juice,pharmacy,biological etc.
Our Service
On Samples
Buyer bear the air fee, but this fee will be reduced from order directly
On After Sales
Free replacement if there is any quality problem
On Delivery
Never delay delivery timeÂ
On Materials
Ensure material pure
Ensure material pure
Welcome Â
Packing&Shipping information and pictures of  SS304 SS316L Pneumatic welded Butterfly Valve with Solenoid Valve
Port:Shanghai Port or Ningbo Port,China
MOQ:1 set
Supply ability:1,000 sets/month
Payment terms:T/T,Western Union, Paypal, L/C
Packaging:Shrink wrapped-in seaworthy wooden cased
Delivery time:Depends on quantity
Shipping mode:By sea,by air,by express
1.Sanitary Valves,such as butterfly valves,check valves,diaphragm valves,ball valves,pneumatic reversal valves,ect.
2.Sanitary pipe fittings,such as triclamp ferrule,elbow,tee,reducer,spray valve,sight glass,strainer,ect.
3.Sanitary Pumps,such as Sanitary Centrifugal Pumps,Sanitary Rotary Lobe Pumps
4.Sanitary Manhole Covers,such as square/round/elliptical manhole covers
Sanitary Valves
Sanitary Butterfly Valves
Sanitary Check Valves Sanitary Ball Valves Sanitary Divert Valves Sanitary Diaphragm Valves Sanitary Sample Valves Sanitary Control Valves Sanitary Mixproof Valves
Sanitary Pipe Fittings
Sanitary Elbow
Sanitary Tee Sanitary Reducer Sanitary Cross Sanitary Triclamp Ferrule Sanitary Cap Sanitary Pipe Hanger Sanitary Tank Cleaning Ball Sanitary Hose Joint Sanitary Unions Sanitary Sight Glass Sanitary Strainer
Sanitary Manways
Sanitary Round Manway without Pressure
Sanitary Round Manway with Pressure Sanitary Square Manway Sanitary Oval Manway
Sanitary Pumps
Sanitary Centrifugal Pump
Sanitary Lobe Pump Sanitary Self Priming Pump
Sanitary Tanks
Storage Tank
Fermentation Tank Mixing Tank Warm-keeping Tank
Sanitary TubeÂ
Seamless TubeÂ
Weldless Tube
Sanitary Gasket
Silicone/EPDM Gasket for Triclamp
Silicone/EPDM Gasket for Union Silicone/EPDM Gasket for Butterfly Valve Silicone/EPDM Gasket for Manhole Cover
Breif Introduction of Biomass Wood Pellet Burner Machine
Our Biomass Pellet Burner adopts the most mature combustion technology and semi-gasification compound combustion technology, it has the features of reasonable structure, automatic feeder, fully combustion rate, high thermal efficiency, pollution-free, low- emission, compact structure, easy for installation, small occupied area, low operation cost, etc., which can replace other fuel fired burner.
Model
Main Power (kw)
Consumption(kg/h)
Measurement (mm)
How to Cooling
YGF-200,000
200,000
0.75kw
50kg/h
1900*910*1710mm
0.6T
Air-Cooling system
0.3T
YGF-300,000
300,000
0.75kw
75kg/h
1920*925*1750mm
0.7T
0.5T
YGF-450,000
450,000
1.12kw
115kg/h
1830*1100*2130mm
1T
0.75T
YGF-600,000
600,000
1.9kw
150kg/h
2340*980*2180mm
1.6T
1T
YGS-600,000
600,000
1.9kw
150kg/h
2340*980*2180mm
1.6T
Water-cooling system
1T
YGS-900,000
900,000
3.1kw
225kg/h
2790*1190*2400mm
2.2T
1.5T
YGS-1200,000
1200,000
3.7kw
300kg/h
2900*1300*2420mm
3T
2T
YGS-1800,000
1800,000
5.25kw
450kg/h
3180*1490*2400mm
3.8T
3T
YGS-2400,000
2400,000
8.45kw
600kg/h
3250*1660*2520mm
4.8T
4T
YGS-3000,000
3000,000
10.45kw
750kg/h
3800*1950*3130mm
8T
5T
YGS-3600,000
3600,000
10.45kw
900kg/h
3950*2100*3270mm
9T
6T
YGS-4200,000
4200,000
10.8kw
1050kg/h
4050*2200*3370mm
10T
7T
YGS-4800,000
4800,000
10.8kw
1200kg/h
4200*2350*3400mm
11T
8T
Model NO.: XS-08
Work Pressure: Low Pressure (Pn<1.6mpa)
Working Temperature: Normal Temperature (-40°C<T<120°C)
Material of Seal Surface: Soft Sealed
Valve Body: Forge Welding
Application: Industrial Usage, Water Industrial Usage, Household Usage, Milk,Beer,Juice,Phramacy
Connection Standard: DIN, 3A, SMS, Rjt,ISO,Idf
Flow Medium Parts: 304, 304L, 316L (1.4301, 1.4307, 1.4404)
Port Size: Dn10-150 or 1/2"-150
Way of Connection: Butt-Welded,Tri Clamp,Male and Female Thread
Gasket: EPDM/Vmq/FPM
Working Pressure: 10bar (145psi)
Temperature Range: -20 Degree Celsius to 120 Degree Celsius
Processing Machine: Forge Processing, Advance CNC Machine
Working Principle: Remote-Controlled Operation by The Driving Gear or
Pneumatic Head: Normally Closed,Nornally Open,Air to Air
Trademark: XUSHENG
Transport Package: Shrink Wrap-Carton Case-Exporting Plywood Case
Specification: ISO, 3A, SGS
Origin: Made in China
HS Code: 8481804090
Model NO.: XS-08
Work Pressure: Low Pressure (Pn<1.6mpa)
Working Temperature: Normal Temperature (-40°C<T<120°C)
Material of Seal Surface: Soft Sealed
Valve Body: Forge Welding
Application: Industrial Usage, Water Industrial Usage, Household Usage, Milk,Beer,Juice,Phramacy
Connection Standard: DIN, 3A, SMS, Rjt,ISO,Idf
Flow Medium Parts: 304, 304L, 316L (1.4301, 1.4307, 1.4404)
Port Size: Dn10-150 or 1/2"-150
Way of Connection: Butt-Welded,Tri Clamp,Male and Female Thread
Gasket: EPDM/Vmq/FPM
Working Pressure: 10bar (145psi)
Temperature Range: -20 Degree Celsius to 120 Degree Celsius
Processing Machine: Forge Processing, Advance CNC Machine
Working Principle: Remote-Controlled Operation by The Driving Gear or
Pneumatic Head: Normally Closed,Nornally Open,Air to Air
Trademark: XUSHENG
Transport Package: Shrink Wrap-Carton Case-Exporting Plywood Case
Specification: ISO, 3A, SGS
Origin: Made in China
HS Code: 8481804090