Small Mud Pump Used with Water Well Drill Machine

Model NO.: HFBW250
Power: Electric
Start Up: Electric Pump
Type: Mud Pump
Application: Irrigation Agricultural Machinery
Industry: Irrigation Agricultural Machinery
Media: Mud Pump
Performance: Irrigation Agricultural Machinery
Theory: Mud Pump
Trademark: HF
Transport Package: Wooden Case or as Your Need
Specification: CE
Origin: Henan Zhengzhou
Small Mud Pump Used with Water Well Drill Machine

The main characteristics are the high pressure, lift much, less energy consumption, easy operation, high quality and durable and easy to move, especially for mountain terraces of irrigation.


Small Mud Pump Used with Water Well Drill Machine

HFBW250 mud pump are mainly used for irrigation agricultural machinery. As well they are also the main equipment of the geological survey, the main role in the process of core drilling boreholes. The mud pump is to supply fluid (mud or water), making it circulate during drilling and to carry rock waste back to the ground to lubricate drill bits and drilling tools with cooling in order to achieve and maintain the bottom hole Clean.

Features------small drilling mud pump HFBW250

BW-250 mud pump is a horizontal triplex single acting reciprocating piston pump which has two variable bore and Si Dang, large liner for 1000 meters of large diameter drilling rig, small liner for 1500 meters of small diameter drilling rig...And core drilling rig is mainly used for transporting mud, can also be used for other purposes other aspects of grouting, mines and other long-distance water and sewage
 Model No.:     BW250
Type     horizontal triplex Reciprocating single acting piston pump
Cylinder diameter     80,65,70mm
Piston Stroke      
frequency of stroke     200 times/min
Flow rate     250,166,200L/min
Pressure     2.5,4,5,6,7mpa
Power input     22kw
Diameter of suction pipe     76mm
Diameter of discharge pipe     51mm
Overall dimensions (LxWxH)     1100x995x650mm
Weight     760KG

Ethylene Cracking Furnace Anchor

Anchors are mostly used as fixtures for integral linings (castable, plastic and sprayable linings). Refractory brick linings also use anchors, but they are not used in many occasions. Metal anchors are usually used to support and fix thin or heat-insulating integral linings, such as chimney linings, wear-resistant linings of petrochemical catalytic cracking reactors (usually tortoise shell mesh anchors), integral jet metallurgy The lining of the spray gun, the overall lining of the immersion pipe of the DH and RH vacuum degassing devices, the lining of the rotary kiln discharge day, the feeding port, etc. Metal anchors are mostly used to fix linings with a long-term use temperature below 1200 °C, or short-term use temperature above 1200 °C that can be used intermittently. Ceramic anchors are usually used to fix thicker (greater than 200mm) integral linings and are characterized by:
(1) It can withstand higher operating temperatures, and is generally used in the lining of kilns that are used for a long time above 1200 °C;
(2) It can withstand the erosion and corrosion of corrosive atmosphere;
(3) It can be extended to the working surface to reduce the peeling of the overall lining;
(4) Compared with metal anchors, the contact area with the refractory lining is large, so it has a greater supporting capacity;
(5) The thermal expansion coefficient is equivalent to that of the overall refractory material, which can eliminate the cracking or peeling of the lining due to thermal expansion mismatch

Ethylene Cracking Furnace Anchor,Corbel Anchor,601 Inconel Refractory Anchor,310 Stainless Steel Refractory Anchor

Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.com

August 17, 2023