1, Â Â Â Â Â Â Â Â Strict inspections of all machinery and equipment should be carried out before driving. Is the motor base loose, the bearing lubrication is good, the screen surface is owed to 16. Feeding owe? SPAN lang=EN-US> 2, Â Â Â Â Â Â Â Â Before starting the device, the dust removal device should be activated first, and the sieve can be activated after hearing the signal that allows the device to be activated. 3, Â Â Â Â Â Â Â Â After the vibrating screen is started, it will run for 2~3 minutes. After everything is normal, start feeding. 4, Â Â Â Â Â Â Â Â The operation should be observed frequently during operation, and the fault should be dealt with in time. The body must not touch any rotating parts and extend into the space on either side of the screen. 5, Â Â Â Â Â Â Â Â Do not arbitrarily remove or disable the safety dust removal equipment, and strengthen the maintenance and maintenance and management of the dust removal equipment. 6, Â Â Â Â Â Â Â Â Material shall not accumulate on the screen surface. The debris and materials on the screen surface shall be cleaned in time to prevent the motor from being burned out due to excessive load. 7, Â Â Â Â Â Â Â Â When the power is temporarily cut off, the start switch should be pulled down immediately to clean the screen ore and prepare for the next start. Wheat Conveying Welded Bending Plate Chain Wheat Conveying Welded Bending Plate Chain,Export Alloy Steel Crank Chain,Heavy Welded Bending Chain,Standard Welded Bending Plate Chain Changzhou Donghu Chain Transmission Technology Co., Ltd. , https://www.dhuweldingchain.com