How to maintain the sprinkler in rainy season?

Summer is a rainy season. The maintenance of sprinklers can not be ignored. Now, Xiagong Chu Sheng (Hubei) Special Automobile Manufacturing Co., Ltd. teaches you how to maintain the sprinkler :

1. Check whether oil is in the engine oil. Oil in the engine oil will cause engine oil to deteriorate, lose lubrication, and cause excessive engine wear.

2. Check if the gearbox is filled with water. The gearbox inlet water will spoil the gear oil in the gearbox, causing gear wear. It is the rear axle driven sprinkler or whether the differential is filled with water.

3 , check the line connector is not soaked in rain, if there will be rust caused by sprinkler appliances can not work.

4 , check the brake oil and four brakes, brake oil in the water will make brake fluid deterioration, resulting in brake failure.

5 , if the sprinkler exhaust pipe into the water, it is necessary to remove the accumulated water as soon as possible to avoid impurities in the water to block the catalytic converter or damage the oxygen sensor.

6. Check the battery of the sprinkler battery for water. If necessary, replace the electrolyte.

7 , EFI vehicle to check the engine control computer is water, the water will lead to a short circuit, the computer burned, if you find the computer water, cut off the power, dry with a hair dryer.

8. The automatic transmission car should check whether the automatic transmission and the transmission control computer enter the water.

9. Thoroughly clean the sprinkler body, as the mud splashed on the car will easily deteriorate the paint and the steel plate will rust. Clean the chassis and flush the top of the sand. The chassis is the closest to the ground. Care must be taken to prevent rust. Car body waxing and sealing glaze maintenance, so as not to cause paint damage.

10. When the weather is fine, open all the doors and trunk lids, vent the moisture, remove the seat covers and floor mats, clean and dry them, and use a vacuum cleaner to remove dirt from the vehicle.

11. After the sprinkler comes out of the water, it is necessary to check the engine: first, check whether the cylinder of the engine is filled with water. Inflow will cause the connecting rod to be bent and damage the engine.

12. If water enters the vehicle, the items ( seat covers, floor mats, etc. ) soaked in the sprinkler should be air-dried as soon as possible to prevent mold .

Xiagong Chusheng (Hubei) Special Purpose Vehicle Manufacturing Co., Ltd. Production and supply: 3 tons of sprinklers, 5 tons of sprinklers, 8 tons of sprinklers, 10 tons of sprinklers, 12 tons of sprinklers, 15 tons of sprinklers, 20 tons of sprinklers, 25 tons of sprinklers. All large and medium-sized units, companies and individuals are welcome to consult and discuss the purchase. National Free Consultation Hotline: 0722-7508822,015672994333, Corporate Website: