The power supply of the security equipment must be well grounded. To prevent leakage, connect the leakage protector before connecting the power supply. And X-ray security inspection machine installation environment should be dry and ventilated, if the environment should be wet and waterproof measures to extend the life of the machine.
Any commissioning and maintenance of the security inspection machine must be performed by professional and technical personnel. It is not allowed to modify or add any accessories without permission.
Security inspection machine operation
Before the system is powered on, the lead curtain used to prevent X-ray leakage at the entrance and exit of the channel must be inspected. If it is damaged, it must be replaced immediately.
Before use, check whether the housing panel, display, keyboard, and cables of the equipment are damaged, and whether the machine is placed in a stable manner, and then check whether the drum runs smoothly.
Check if the conveyor belt is in good condition and the machine's LCD screen is forbidden from scratching or hitting with sharp hard objects.
Do not stand or sit on the conveyor while the belt is running. Do not touch the edges of the belt and the rollers on both sides with your hand. When the conveyor belt does not go or stops when it is traveling, it is necessary to immediately check whether the drum and the conveyor belt have slipped or stuck. Otherwise, the drum motor will be burned.
When the X-ray lamp is on, no part of the body can enter the examination room.
When the environmental temperature of the security inspection machine is lower than 5 degrees Celsius, it should be warmed up 30 minutes in advance. Before the baggage passes through, the water stains and ice cubes on the baggage shall be cleared.
All-in-one Roll Materials Cutting Machine
All-in-one Roll Materials Cutting Machine
Flying Man all-in-one cutting machine can cut the width of 1-700mm, thickness up to 0.8mm of the materials, suitable for non-woven fabric cutting, aluminum foil cutting, copper foil cutting, reflective film cutting, plastic film cutting, Kraft paper cutting, etc. This automatic cutting machine is suitable to cut the wider width and wider diameter of roll materials. Increase the feeding drum, can straighten the material easy to fold, increase the feeding frame reduction gear, prevent processing too fast lead to the material roll because of inertia knotting and rolling to the ground, resulting in material breaking pull deformation, slip and scratch.
This cutting machine has different models#FMHZ-400A/FMHZ-500A/FMHZ-600A/FMHZ-700A, cutting width from 1mm to 700mm, cutting thickness is different. The maximum cutting thickness is 0.8mm.
This machine is also known as non-woven fabric cutting machine, wall paper cutting machine, PVC film cutting machine, reflective film cutting machine, copper foil cutting machine, aluminum foil cutting machine, glass Cloth Cutting Machine, fiber cloth cutting machine, mobile phone film cutting machine, plastic slice cutting machine, bubble film cutting machine, flannel cutting machine, etc.