How to eliminate safety hazards of tanker trucks?

With the development of industry, the demand of human beings for oil has been increasing, and the number of tankers that are the pillars of transportation oil products has also grown sharply. With more and more frequent transportation of refined oil products, its potential safety risks are becoming more and more prominent. How to solve the safety hazards of 16-ton oil tanker transportation? Can start from the following two aspects.

First, the explosion-proof camera is mounted on a 16-ton oil tanker .

1 Because the tanker transport is generally flammable and explosive items, it needs full monitoring to avoid accidents during the transport process, and the explosion-proof camera on the tank car must be connected with the alarm system. An emergency occurs during the transportation process. The driver can sound the alarm and alarm at the first time so as to minimize the damage.

2 The tank vehicle's professional on-board explosion-proof camera is installed at the rear or at the outlet of the vehicle or at the top of the vehicle head so that the entire tank truck can be observed. In the event of a sudden situation, the driver can promptly discover, or use the wide-angle lens of the on-board explosion-proof camera to assist the reversing. Due to its wide angle and wide viewing angle, it can reduce the accident of the tanker from the root. occur.

3 When vehicle explosion-proof cameras are installed on tankers, if the environment at the site has flammable and explosive oil and gas substances, then the cable laying must also be properly protected against explosion and explosion. Through the real-time monitoring of tank trucks, they can be promptly reflected when accidents happen or when an accident has occurred, and the accidental damage is minimized.

Second, the 16-ton tanker driver needs to pay attention to the following issues in the process of transporting refined oil.

1 It is forbidden to drive with fatigue. Tanker transport is flammable and explosive. Therefore, serious impacts must be avoided during driving. If drivers are tired, driving is very likely to cause accidents such as rear-end collision. If the situation is serious, it will directly lead to the explosion of the tanker truck, seriously threatening people's safety.

2 Prevent the accumulation of static electricity. As the oil product collides with the tank body of the oil tank during transportation, friction occurs, resulting in the generation of static electricity. Therefore, when transporting, it must be loaded with proper amount of oil, neither too much nor too little, and it is necessary to keep driving at a constant speed while driving to ensure that the oil in the tank is relatively stable. Also connect the static wire to ensure that the static wire contacts the ground. The other is to prohibit smoking and answering calls when driving a tanker.

3 Avoid overheating the tank car engine. When using the tanker in the summer, the technical condition of the vehicle must be checked frequently, and the safety of the vehicle should be checked. It is strictly forbidden to drive the sick car on the road. Due to the relatively high temperature in summer, the potential safety hazards when driving a tank truck are greater. Therefore, when driving a vehicle, attention should be paid to changes in the water temperature table, and the temperature must not exceed 95°C.

The above is the advice on how to solve the safety hazards of tanker driving. To drive safely, it is not only the relevant configuration of the vehicle, but also the driver's driving habits. If you want to eliminate safety hazards, you must pay attention to the details of driving.