
Tiandi Weiye Yishou mobile video surveillance system consists of intelligent marking terminal, high-performance anti-escape host, remote command terminal and other parts. As shown in Figure 1. Smart marker terminals, including video capture and wireless terminals. After the front-end video and audio camera captures the video, it is encoded in real time by the encoder into a format that meets the requirements, and then sent by the wireless network. The transmission network consists of public and private networks. The public network is mainly provided by the three major mobile, China Unicom, and telecom operators. With the promotion and application of 3G and 4G technologies, the public network can provide sufficient bandwidth and data transmission rate [1]. When the outside medical treatment location is far from the monitoring command center, it is appropriate to use the public network for video and audio data transmission to avoid the higher costs incurred by the private network construction. The special network is suitable for monitoring the position of the command center and the outside medical treatment site. The advantage is that the transmission rate is fast, the bandwidth is high, and the construction cost is reasonable.

(1) Advanced video codec technology requires high compression ratio, fast codec speed, high real-time transmission performance, and strong anti-interference ability of the transmission channel. At present, there are two major series of video codec technologies: MPEG and H.26X. H264 uses motion prediction and differential coding to reduce and remove redundant video data by intra-macroblock prediction and inter-prediction prediction, and differentially encoded residual values ​​between frames to achieve data compression. In the case of motion compensation, compression using the H264 encoder is more than twice that of MPEG-2 and 1.5 to 2 times that of MPEG-4. H264 is roughly divided into two layers, namely Video Coding Layer and Network Adaptive Layer (NAL) [2]. The VCL layer performs efficient compression and encoding of video data, and the NAL layer is used to shield the differences of various communication networks, and provides appropriate header information according to various transmission layer storage media, thereby improving the anti-interference ability of the video data. .
Titanium Dioxide
Titanium Dioxide is white powder, non-toxic, chemically inative, surface treated with aluminum compounds.
The products show good whiteness,high gloss,great hiding power,strong tinting power,favorable weatherability, high chalk resistance,low oil absorption,good wetting and are easy to disperse in a variety of systems.
1)In paint industry, It is used as white pigment and glaze of porcelain.
2)It can also be used as coating and filling in paper-making industry to help paper to be printable and opaque.
3)In metallurgical industry, it can be used to make spongy titanium, alloy of titanium and iron and hard alloy, etc.
4)It can also be used to make nonconductor, electric welding rod and porcelain enamel.
5)It can also be used in synthetic fiber, plastic, rubber, printing, dying, cosmetics, medicine fillings and food additives.
Titanium Dioxide,Titanium Dioxide Pigment,Titanium Dioxide White,White Powder Titanium Dioxide
Yucheng Jinhe Industrial Co.,Ltd , https://www.hnironoxide.com